The cricket bat will be susceptible to wear and tear the moment it leaves the workshop. Everything manufactured frequently requires repair, however, this is dependent on the quality of the product. Prolong the life and performance of a bat by maintaining it properly and assuring rapid repair if any problems emerge during practise and play.
Just as car owners are expected to maintain their vehicles’ oil, water, and tires, players are expected to maintain their bats to reduce the possibility of catastrophic damage by taking some responsibility to avoid damage and do routine maintenance. Understand common problems with a cricket bat and how to repair them in this article.
5 Common Problems with Cricket Bat:
Because of the nature of the way the ball is played, the cricket bat handle is extremely prone to strain. The handle of a bat is typically the first portion of the bat to require repair. The first symptom of deterioration is if you notice the handle loosening.
Even if no obvious cracks occur, a batsman may be inhibited by the looseness. If you detect the handle of your cricket bat getting loose, have it examined by a cricket bat specialist. They will assess the degree of the damage.
Also Read : 9 Proven Cricket Batting Shots Selection Tips 2022
The base of the bat (the toe) is extremely vulnerable to injury. Because of the balanced construction of a cricket bat, this is the weakest region of the willow blade yet is subjected to the quickest ball and bat speed at contact. Because the bat’s toe is the weakest link.
It is prone to splitting and breaking. Check the bat’s toe on a regular basis for cracks. Super glue can be used to repair small fractures, although PVA adhesive may be required for hairline cracks. Cracks that are longer than 2 inches may require immediate repair.
Moisture is particularly detrimental to cricket bats. Because cricket bats are made of wood, they should not be stored in wet regions where moisture might accumulate. Wet bats frequently become shattered bats or bats that need expensive repairs. The compacted willow fibres stretch when a bat is exposed to excessive dampness.
Because the surface of the bat is so porous, the willow behaves like a sponge. As a result, the bat’s quality and substance become brittle and difficult to use. Allow your bat to dry naturally if it becomes unavoidably wet, and seek medical attention if swelling occurs.
Willow is a soft wood by nature, and when pressed, it offers the rebound properties needed to strike the extremely hard cricket ball. Due to wear and use, certain little fractures are expected to appear on the bat; nevertheless, these will have no effect on its performance. Remove any loose debris, press in the PVA adhesive, and clamp until the glue dries.
As for feathering therapy, a grip cut into 2 or 3 cm bands and applied around the healing area can be effective. When the adhesive has dried, carefully sand the surface and, if desired, add a facing of either fibre reinforced tape or clear blade tape.
Even if the bat has been properly pounded in, little cracks on the face of the bat are typically not the reason for alarm. The striking region of the bat’s face is the most vulnerable to fractures since it is the most exposed component of the bat.
If you look after your cricket bat, the face will occasionally last more than a season before shattering. However, this varies from bat to bat. Always oil your bat as soon as you get it to avoid fractures from forming. Use only raw linseed oil, and never dip the bat in it. To help protect the surface, apply adhesive tape to the bat.
How to Repair a Cricket Bat?
Repair toe cracks:
The majority of cracks in cricket bats may be mended with glue, repair tape or twine, sandpaper, and oil. First, find the crack and fully fill it with adhesives, such as wood glue or superglue. Allow 12 to 24 hours for any extra glue to dry.
After that, sand the area using 100-220 grit sandpaper. Raw linseed oil should be applied to the mended region. Use bat tape or string to secure the area. If you’re going to use twine, dip it in glue as you wrap the bat.
Cracks on the edge, face or handle of your bat are common. To repair fractures in bats, start with the same methods as you would for toe cracks. After you’ve filled the crack with glue, cover the bat with two pieces of wood (one on each side) and clamp it in place until the glue cures.
After the adhesive has dried, repeat the sanding, oiling, and taping procedures. If you don’t have a clamp, cut off strips from an old bat grip and use them as elastics to clamp the bat while the adhesive cures.
Reattach the handle:
Cricket bat handles frequently collapse or shatter after repeated use. When the handle of a cricket bat falls out of the body, do not throw it, as it can be reattached with glue. Cover the handle with wood glue and place it back into the bat’s body.
Tap the handle into place with a rubber mallet. Get rid of any excess glue. Allow the adhesive to set for at least 48 hours before taping or clamping the bat handle in place. Insert wood screws into the body and into the handle to provide additional stability.
Maintaining your cricket bat is essential as a cricketer. Replace the rubber handle immediately if you observe wear or cracking. Tape the new grip in place after carefully rolling it on. Keep your bat somewhere cool and dry, never wet or moist. Never leave your bat in a hot car or another heated environment, since this might deform the wood.
If the bat becomes wet, wipe it down with a towel and place it somewhere cold to dry. After it has dried, apply a thin coating of oil. Remove the anti-scuff sheet after each season. Apply a coat of oil and leave it for 24 hours. Then, add a second application of oil and let it sit for a week. Sand it down and re-oil it. Replace the anti-scuff sheet.
Your cricket bat will ultimately need to be mended due to continuous striking, blocking, and a lack of care. Cricket bat damage may not appear to be significant, but if left unchecked, it might shatter. Cricket is a fast-paced sport that is popular in many nations throughout the world. The game is played on a field with a bowler bowling a ball to the person at bat, and bats frequently break or crack during play.
Some cricket bat problems, such as cracks, can be repaired depending on the situation, but if a crack forms, it will worsen and the bat will have to be replaced. However, if you are going to fix a crack, you should do so as quickly as possible. The lifespan of a bat is determined by how often you take care of it and the level of maintenance that you offer to the bat.